What is IR2104 Chip?

 The IR2104 is a high-voltage, high-speed half-bridge driver integrated circuit developed by International Rectifier (Infineon Technologies). It is designed to drive the gate of N-channel MOSFETs or IGBTs in various applications, including motor control, power inverters, and other switching power supplies. The IR2104 is particularly well-suited for driving high-speed power transistors, offering features that enhance its performance in demanding environments. 

Key Features:

  1. High Voltage Capability: The IR2104 can handle voltages up to 600V, making it suitable for a wide range of industrial applications where high-voltage operation is necessary.

  2. High and Low-Side Outputs: It provides separate high-side and low-side output drivers, which allows it to drive both the upper and lower transistors in a half-bridge configuration efficiently. This capability is crucial for applications like motor drives and inverter circuits.

  3. Fast Switching Times: With a typical rise and fall time of around 20 ns, the IR2104 can switch transistors rapidly, which helps improve the efficiency of power conversion and reduces heat generation in the devices being driven.

  4. Bootstrap Operation: The IC employs a bootstrap capacitor to enable the high-side driver, allowing it to drive the high-side MOSFET above the supply voltage. This is essential in applications where the high-side switch needs to operate in a floating configuration.

  5. Protection Features: The IR2104 includes built-in features for protection against overcurrent and under-voltage conditions. This helps prevent damage to the driver and connected power devices, ensuring reliable operation over extended periods.

Applications:

  • Motor Drives: Ideal for driving brushless DC motors, stepper motors, and other types of electric motors in robotics, HVAC systems, and electric vehicles.
  • Power Inverters: Used in DC-AC converters for solar inverters, UPS systems, and other renewable energy applications.
  • Switching Power Supplies: Common in designs where high efficiency and compact size are needed, such as in consumer electronics and industrial power supplies.

Technical Specifications:

  • Input Voltage Range: 10V to 20V
  • Output Current: Can drive up to 2A of gate current
  • Propagation Delay: Approximately 50 ns
  • Operating Temperature Range: -40°C to +125°C

The IR2104 is recognized for its robust performance in high-speed and high-voltage applications, making it a go-to choice for engineers designing efficient power electronics. For more detailed information and specific applications, you can refer to the manufacturer's datasheet.  

Search List Page：

IR2104 Parts Search Page | Datasheet PDF | Price | Quantity-MobikeChip 

previous article：
What is ADAU1701JSTZ ?
next article：
What is DS3231S ? 

Comments

Post a Comment

Popular posts from this blog

What is SN74LS32N Chip?

Image
  The   SN74LS32N   is a   quad 2-input OR gate   IC from the   74LS family   of logic devices, manufactured by   Texas Instruments  and other companies. It is designed to perform logical OR operations on multiple inputs, making it useful in various digital circuit applications.  Key Features: Quad Functionality : The SN74LS32N contains four independent OR gates, allowing for multiple logical operations within a single package. Fast Switching Speed : With a typical propagation delay of about  10 ns , it is suitable for high-speed digital applications. TTL Compatibility : Designed with TTL (Transistor-Transistor Logic) compatibility, it can interface seamlessly with other TTL devices. Low Power Consumption : The LS series is known for its low power dissipation, making it suitable for energy-efficient designs. Wide Supply Voltage Range : It operates from a supply voltage of  4.75V to 5.25V , making it versatile for various digita...
Read more

What is LNK364GN Chip?

Image
  The  LNK364GN  is a highly integrated  switching power supply IC  from  Power Integrations , specifically designed for isolated and non-isolated applications in low-power environments. It is part of the LinkSwitch series, providing a compact solution for various power supply needs. Key Features: Integrated Power MOSFET : The LNK364GN incorporates a high-voltage power MOSFET, which simplifies design and reduces the number of external components, resulting in a smaller overall footprint. Wide Input Voltage Range : It operates over a wide input voltage range of  85V to 265V AC , making it suitable for universal power supply applications across different regions. Output Power : The device can deliver up to  5W  of output power in isolated configurations, making it ideal for applications such as adapters, chargers, and small power supplies. High Efficiency : Designed for high efficiency, the LNK364GN minimizes energy loss and heat generation, wh...
Read more

Understanding Flip Flops: Essential Memory Elements in Digital Circuits

Image
  In the world of digital electronics,   Flip Flops   play a crucial role in data storage, synchronization, and timing control. These bistable circuits are fundamental building blocks in sequential logic systems and are widely used in applications ranging from microprocessors to communication systems. Whether you're designing a counter, register, or state machine, flip flops are at the heart of the system’s functionality.  In this article, we’ll explore the working principles of flip flops, their types, and their various applications in modern electronic systems. We’ll also look at why flip flop chips are indispensable for precise control and data storage in digital circuits.  What Is a Flip Flop? A  flip flop  is a digital electronic circuit that has two stable states. It is a type of memory element used to store binary data (0 or 1). A flip flop can be toggled between its two states based on inputs, and it retains its state even when the inputs are r...
Read more